Home ≫Co2 Incubator> Stackable Large Capacity CO2 Incubator Shaker SMI-132ICS- 314L
Large carbon dioxide shaking incubator is an all-round shaking incubator launched by Jindal based on the different needs of customers. At present, this product integrates all the advantages of the company’s products. According to the special requirements of cell culture, more design features have been added, striving to provide a perfect solution for your cell culture. Universal sticky mats allow for direct contact or sticking a suitable holder in place. SMI-132ICS- 314L is suitable for all kinds of cell culture, including CHO, hybridoma, mammalian cells, insect cells, etc.
7 inch touch panel is intuitive and easy to operate, so you can easily control the switch of a parameter and change its value without special training.
30-stage programs (4 programs) can be set up to set different temperature, speed, CO2 concentration, time and other culture parameters, and the programs can be automatically and seamlessly switched between; any parameters and historical data curves of the culture process can be viewed at any time.
Perfect appearance, monitor interface shows temperature, speed and CO2 concentration. With the enlarged digital display and clear symbols on the monitor, you can observe from a greater distance.
The ability to set a password for unlocking the screen controls provides security for users in public labs to avoid stopping experiments in progress by accidental operation.
Active humidity control function (optional) can control humidity up to 85% r.h. Micro-culture liquid volatilization can be controlled within 10% for one week.
RADOBIO’s embedded humidification and humidity control module, using precise temperature control of the stainless steel heating plate humidification, can ensure stable and reliable humidity control, to avoid the disadvantages of traditional ultrasonic humidification methods to the maximum extent.
If humidification is needed, the control water inlet solenoid valve will automatically open, and the high temperature heating plate will vaporize water into molecular water vapor quickly while sterilizing, and use its own volume expansion to enter the incubator, which will quickly spread to the whole incubator chamber with the internal circulation system of the incubator.
As the high temperature liquid water all vaporized into free molecular water, so the water vapor is not easy to condense in the incubator, can achieve the best humidification effect, the maximum to avoid the traditional ultrasonic humidification water vapor easy to secondary condensation drawback.
High-temperature humidification and sterilization at the same time, to avoid the traditional humidification easily in the water tank growth of miscellaneous bacteria, thus causing the disadvantages of bacterial contamination.
For light-sensitive media or organisms, the shade can be pulled up for cultivation. The sliding blackout curtain prevents sunlight (UV radiation) from entering the interior of the incubator, while retaining the convenience of viewing the interior of the incubator.
The blackout curtain is positioned between the glass window and the outer chamber panel, making it convenient and aesthetically pleasing, and perfectly solving the inconvenience of applying tin foil.
Intelligent remote control allows you to control the parameters of the incubator more easily.
Double glazed interior and exterior safety doors for excellent thermal insulation.
Door heating function prevents fogging of the glass door and allows observation of cell culture at all times.
Door heating function effectively prevents condensation on the glass window, allowing good observation of the shaker when the temperature difference between the inside and outside is large.
Waterproof design of the incubator body, all water or mist sensitive parts including drive motors and electronic components are placed outside the incubator body, so the incubator can be cultivated in high temperature and high humidity environment.
Any accidental breakage of flasks during incubation will not cause damage to the incubator, the bottom of the chamber can be cleaned directly with water, or the chamber can be thoroughly cleaned with cleaners and sterilizers to ensure a sterile environment inside the chamber.
Stable start-up with unique bearing technology, almost noiseless operation, no abnormal vibration even when multiple layers are stacked.
Quiet and stable machine operation, longer service life.
Compared with traditional fans, the heatless waterproof fan can make the temperature in the chamber more uniform and stable, while effectively reducing the background heat, which can effectively save energy consumption.
8mm thick aluminum tray is lighter and sturdier, beautiful and easy to clean.
Push-pull design allows for easy placement of culture flasks at specific heights and spaces.
Can be used as a single layer on the floor or on the table, or as a double or triple stack, and the top pallet can be pulled out to a height of only 1.3 meter from the floor when used as a triple stack, which can be easily operated by laboratory personnel.
A system that grows with the task, easily stacking up to three tiers without adding more floor space when the incubation capacity is no longer sufficient, and without further installation. Each incubator shaker in the stack operates independently, providing different environmental conditions for incubation.
Model
|
SMI-132ICS- 314L
|
---|---|
Quantity
|
1 unit (1 layer)
|
Control interface
|
7.0 inch LED touch operation screen
|
Rotation speed
|
2~300rpm depending on load and stacking
|
Speed control accuracy
|
1rpm
|
Shaking throw
|
50mm (Customization is available)
|
Temperature control mode
|
PID control mode
|
Temperature control range
|
4°C~60°C
|
Temperature display resolution
|
0.1°C
|
Temperature fluctuation
|
±0.1°C
|
Temperature field uniformity
|
±0.3°C @37°C
|
Heating power
|
750W
|
Cooling power
|
280W
|
Tray size
|
520 x 880mm
|
Internal usable height
|
340mm
|
Maximum load
|
50kg
|
Tray capacity of shake flask
|
60x250ml or 40x500ml or 24x1000ml or 15x2000ml or 15x3000ml or 8x5000ml (choose sticky pad, the load capacity will increase by about 10%)
|
Timing function
|
0-999.9hours
|
Maximum expansion
|
Up to 3 units can be stacked
|
Dimension (W x D x H)
|
L1330 x W830 x H610mm (one unit); L1330 x W830 x H1170mm (two units); L1330 x W830 x H1725mm (three units)
|
Volume
|
315L
|
Illumination
|
FI tube,30W
|
CO2 measurement principle
|
Infrared (IR) detection
|
CO2 control range
|
0-20%
|
CO2 display resolution
|
0.10%
|
CO2 supply
|
0.05~0.1MPa is recommended
|
Sterilization method
|
UV sterilization
|
Number of settable programs
|
4
|
Number of stages per program
|
30
|
Data export interface
|
USB interface
|
Historical data storage
|
800,000 messages
|
Working environment temperature
|
5°C~ 35°C
|
Push-pull blackout curtain
|
build-in
|
Power supply
|
115V~230V±10%, 50~60Hz
|
Weight
|
145kg per unit
|
Product Brochure Link here