S.M. Scientific Instruments (P) LTD

PCR WorkStation (New Modular Design) SMI-4013NMD

Home ≫Clean Air >PCR WorkStation (New Modular Design) SMI-4013NMD

PCR WorkStation (New Modular Design) SMI-4013NMD



DNA/RNA UV-cleaner box UVT-B-AR is designed for clean operations with DNA samples. UV-Cabinet provide  protection against contamination.

Model is a bench-top type, made of metal framework, working surface made of stainless steel.

UV-cleaner boxes are equipped with an open UV lamp installed in the upper hood. UV-radiation from the open lamps disinfects the working area inactivating DNA/RNA fragments during 15–30 min of exposure. A digital timer controls the duration of the direct UV irradiation. A daylight lamp provides proper illumination of the working surface.

UV-cleaner boxes are equipped with a flow-type bactericidal UV cleaner–recirculator AR, which provides constant decontamination inside the cabinet during operation. They are recommended for operations with DNA/RNA amplicons.

UV cleaner–recirculator AR consists of a UV lamp, a fan and dust filters organized in a special body so that a user working with a UV-cleaner box is protected against UV light. Recirculator increases the maximum density of UV light making it  sufficiently effective for DNA/RNA inactivation. The UV–recirculator processes 100 UV-cleaner box volumes per hour, creating permanent aseptic conditions of operation inside the UV-cleaner box.

Specially assigned moving tables T-4 (with wheel locks) with a drawer are available on request.

Advantages of Biosan UV-cleaner boxes:

  • Ozone free high density UV decontamination
  • Long living UV lamps (9,000 hours average)
  • Automatic switch off of UV-lamps when the protective screen is opened
  • Bactericidal flow-type recirculator providing permanent decontamination inside UV–cabinet during operation
  • Shockproof glass walls
  • Low noise, low energy consumption
  • Tables for installation of UV-cleaner boxes
  • UV-cleaner boxes with the bactericidal UV cleaner–recirculator AR is the patented Biosan solution

Product Details

Walls Material
SMI-305Rear: stainless steel, Sides: steel with chemical resistant powder coating Front: glass (EUROGLASS, Germany)0 NMD
Working surface material
Stainless Steel
Open UV-lamp
1 x 25W built‑in bactericidal UV-C, TUV 25W 1SL/25
UV radiation level
18 mW / cm2 / sec
Radiation Type
UV (λ = 253.7 nm), ozone-free
Digital time setting of direct UV exposure
1 min–24 hrs / non–stop (increment 1 min)
1x25W (efficiency >99% per 1 hour)
Daylight lamp (for working area illumination)
1 x TLD-15W
Thickness of side panels
2 mm
Thickness of upper front panel
8 mm
Thickness of screen
4 mm
Optical transmission
UV protection
>96%, UV-protection film
Working area
645 × 490 mm
Opening dimensions (fully raised protective screen)
645 × 190 mm
Safety features
Automatic open UV-lamp switch off when screen is open
Power outlets inside the unit
Inlet for power cords and 1x Built-in socket, max. 1000 W
Overall dimensions (W×D×H)
700 × 580 × 555 mm
Weight (net / gross)
31.2 / 42 Kg
Power consumption
67 W
Nominal operating voltage
100-240 V, 50/60Hz
Optional table
T-4 (800 × 600 × 750 mm)

Product Brochure

Product Brochure Link here

Featured Video