S.M. Scientific Instruments (P) LTD

Glove Tester SMI-GT-002

Home ≫Clean Air >Glove Tester SMI-GT-002

Glove Tester SMI-GT-002

CLICK TO SCAN

Description

JINDAL Glove Integrity Tester is used to detect even tiny leaks on the glove via the testing port, and according to Air Pressure decay leak testing principle. It’s easy for manufacturers and user to verify the integrity of gloves.

  • Japanese technology: Confirmed to international standard ISO 14644-7.
  • Diversified testing mode: Can be on-line testing (Need to match a glove fixing ring)
  • Modularized function: can test more than one glove at the same time.
  •  High test pressure: maximum pressure to 5000 pa, tiny leak can be detected.
  •  Intelligent control interface, with the function of data Storage.
  • Three test modes: quick test, normal test, precision test.
  •  This equipment meets the requirements of USA gloves-box gloves factory inspection standard.
Enquire Now
Model No.
GLT-10
Power Supply
AC220V, 1Φ, 50Hz
Rated Power
100 w
Max. Testing Pressure
5000 Pa
Working Environment
Normal air conditioning clean room( Don't test in the environment of rapid changes in temperature)
Overall Dim. (WxDxH)
500×400×1100 mm (19.7''x15.7''x 43.3'')
Weight
~35 Kg
Accessory
Sealing device or Glove fixing ring( Both Optional) Note: Increase the number of sealing device or Glove fixing ring according to the number of tested gloves
Quick Test
Get glove integrity result in a short time
Normal Test
Test after glove internal pressure is stable, will get an accurate result.
Precision Test
When unable to get results under Normal test, Mat uses Precision test, with long time test, the results will be more accurate.

Product Brochure

Product Brochure Link here