Hospital infection control is a serious problem which cannot be ignored by any Hospital administration. Proper attention needs to be focused on the system of cleaning, Disinfection, packing, sterilization & storage of different surgical appliances and instruments.

The continuous advancements made in the field of biomedical engineering have resulted in development of a range of surgical appliances & apparatus with very intricate & delicate profiles.

Any sterility supply chain must have a system which can clean and disinfect these components with a high degree of repeatability and accuracy.

Jindal Washer Disinfectors have been designed with just that in mind. The system is not only flexible, but is also very user friendly to take care of your every needs.

The disinfector consists of three rotary spray arms. The design and location of the arms ensure that every surface of the loaded material is uniformly cleaned. The chamber of the disinfector has rounded corners to prevent dirty breeding grounds. The rotation of the arm is activated by the water pressure which eliminates any mechanical drive system.

Our disinfector comes with a range of standard accessories for different surgical appliance & kidney trays, bottles, tubings & instruments.

The machine is incorporated with an automatic detergent dozing system to doze the required amount of detergent in the rinsing water.

The unit is incorporated with an in built electric water heater. The hot water here is used to disinfect the loaded material at a temperature of 90°C (i.e. hemodisinfection) after thorough cleaning & rinsing.

The disinfector has a microprocessor controlled operation. The operating console is provided with a electronic unit having LEDs for easy operation and monitoring of the process. Up to 3 pre-programmed processes give the user fantastic flexibility for cleaning and disinfecting a wide range of load configurations.

As in hospitals, where hot water is not available, the disinfector is equipped with an electric heating system. This heats the water to a temperature of 90°C for higher cleaning efficiency.

The complete body is fabricated out of non-corrosive 304 Grade Stainless steel/PVC Moulded. The inner chamber is made of Stainless Steel with rounded corners for easy cleaning and to avoid contamination. The door is provided with a high quality gasket. All piping and valves are of Stainless steel construction.

The disinfector has a standard capacity of 250-300Ltrs.

The disinfector is a simple easy to use machine. The machine requires no installation. It has to be connected to the different supply lines and the drain line to start the operation.

• Ergonomic design
• Convenient front loading system
• Suitable for efficient treatment of medical items
• User friendly operation and controls
• Microprocessor control
• Fresh water intake for each cleaning and rinsing stage ensuring hygienic process

• Double door with sliding opening